|
Rotator Control - PSTRotor (PSTRotorAZ).
PSTRotor & PSTRotorAZ shareware program can control virtually all available antenna rotators.
Refer to the PSTRotor website for full information about this software and list of rotators supported.
Winlog32 can co-operate with both the PSTRotor and PSTRotorAZ software controller interfaces enabling control
of rotor hardware for positioning the antenna.
The PST control software can also be used independently.
The interface requires PST control software installed.
The interface provides positioning of the rotor to the current Log QTF value by using the Winlog32 toolbar
button indicated; it can also be manually positioned with the controller interface.
The toolbar button is only displayed when the rotor control is enabled.
Menu/Options/Settings - Other - Rotator Control.
Refer to the PST documentation on what settings are required to interface to other software.
Option - Enable PSTRotor (Enable PSTRotorAZ).
Controls the PSTRotor software controller from Winlog32 via the software interface.
Only one PST option can be enabled.
Option - Auto-Run 'PSTRotor' on Start-up.
Automatically starts the PST control software when Winlog32 is started.
The control software path and file name must be provided if auto-startup is required.
PSTRotor and PSTRotorAZ are both independent programs and should be previously installed and tested on your computer.
|